CA Tactics – Tips From The Front Row

If you are like me, a combat archer who loves to be in the thick of it, then take a second and let me share what Ive learned in these few years.

The intention is to show the differences in CA tactics and provide some tips. More focus on front line engagement (R2)

fig. 1
fig. 1

Let’s go over some situations that present themselves here. We have green and red team. Please note that the G1 is hanging back, while R2 is behind the shield line.

Defense

The benefit of being in the front line here is clear. You get to stand behind someone who can actively help protect you. Though their first priority is usually to protect themselves and hold the line, they can help you as well.

Once R2 moves up to this position, communicate. Let the shield line know you are there. They can actively call enemy missiles as well as deflect. Once there, when you reload, keep your eyes on the field, and duck down. This will allow you to reload safely and not get plucked off by opponent archers or poles.

G1 does not enjoy the benefit of cover. Though you have distance on your side, you may think some bolts or arrows may not reach you, but you are ripe for the picking. The opposition will still see and fear your missiles however. sometimes you don’t have a clear shot, stay locked and loaded and pointed at the foe, you will keep their heads down and still help the team. If the opponent line make a push you wont get trampled but your shots are not as effective as in the rush, an opponent may not even register your hit. It may be a good idea to wait until the line settles a little, then pluck off any remaining opponents.

Offense

Call your shots and let your team know you are there! It never hurts to tell your team you are firing. Not only does it assist your team, but the opposition will also hear this and get distracted because the archer may be pointing an arrow at their face. Additionally, if your line is having a hard time with a specific person, they may want you to take them out. Always identify your warlords and battle hardened friends, they know who the key opponents are.

R1, listen to your team. If a polearm wants to step in to fill the line, take a step back and play a more support role. Polearms are very effective at keeping the shield line back with a constant threat whereas with CAs there are the reload down times to contend with.

If you are G1, work with another archer if possible. Alternate fire so you are not caught unloaded by a stray opponent.

Also keep a thrown weapon on you. A dagger will fit nicely into your quiver or belt and can be used again and again if once you’ve shot, you are getting rushed by a ‘heavy’.

And when on the front line, take your time, and make every shot count. If you go ‘Machine Gun Kelly’ and have a 30% kill ratio, you’ll then have to reload more often and disrupt the lines. Keeping your bow leveled on the enemy keeps their heads down and distracted. Let the poles take them out as well!

Please comment with thoughts or additions!

Watch where you point that thing! Thrown weapons place in the SCA

thrown weapons
thrown weapons

It came up that thrown weapons are handled differently from Kingdom to Kingdom. For instance I recently learned that in Meridies, a combat archery cannot use thrown weapons. This is apparently only for ‘heavy’ or ‘rattan’ fighting use.

So how many variances are there in the combat community? Does it make sense that CAs or siege engineers cannot use throwing axes, maces, knives?

Im curious about the debate for and against. Society law is pretty clear about who can and who cannot. Clearly a CA cannot engage in melee unless specific conditions are met, and then only if the combatant is authorized appropriately.

Please comment below with your thoughts!

Satisfaction to your face!

Greetings friends!

maces and daggers
maces and daggers

What gives you the most satisfaction when causing the death of a fellow armored combatant on the field? I love shooting someone square in the grill. Its nice when my skills and the opportunity affords the sweet shot. But those seasoned veterans wielding a sword and board are very good at covering up their noggin, which makes the sweet shot even more glorious!

So what is your weapon of choice? I know it is impractical to carry an arm load of throwing maces on the field, but have you taken someone out with one? A clean shot with a siege engine? Throwing dagger to the face?

What makes you smile?

  • Crossbow Bolt (25%, 1 Votes)
  • Mace (25%, 1 Votes)
  • Javelin (25%, 1 Votes)
  • Other (comment with your weapon!) (25%, 1 Votes)
  • Arrow (0%, 0 Votes)
  • Dagger (0%, 0 Votes)
  • Siege (0%, 0 Votes)

Total Voters: 3

Loading ... Loading ...

Back to the Broken Bolt Page
This was stuck in my head while writing this post

You’re gonna poke an eye out with that thing!

Construction and standards of Thrown Weapons.

example of a throwing mace
example of a throwing mace

After constructing a few throwing maces, I got some good hands on experience, and wasted a little money, but in the end the ones I made need to be disassembled.  Alas the Schedule 40 PVC I was using exceeded the PSI but didn’t conform in other ways. It doesn’t remain flexible enough and can shatter. Thanks to Godai and Otto they have set me on the right path.

I want to share that information with you all now.

Siloflex: A brand-name polyethylene tubing made from PE3408 resin and conforming to ASTM D2239 standards. The material is approved for various uses throughout the rules in pressure ratings ranging from 75 PSI to 200 PSI. Please check the standards in the appropriate area of the rules for what is allowed.
Siloflex equivalent: other tubing or pipe, typically made for drinking water applications, made from polyethylene resins with the ASTM classification of PE 3408 and produced to the ASTM D2239 standard.

This was the mojo I needed! If you do a search for ‘ASTM D2239‘ suddenly you get tons of hits. Try doing a search for ‘Sil-o-flex‘… [crickets chirping].

 

siloflex_pipe

The 1″ Pipe I’m getting in lengths so I don’t have to straighten it out. The inner 3/4″ pipe is in a coil, but I have to worry less about the straightening as it will be inserted and glued inside the 1″ pipe.

I hope this helps others who find themselves on the path to making thrown weapons! Now that you have some technical specs to compare, it will make using any other comparable product easier to find!

Perhaps Ill save one of these PVC maces for martial classes for the ‘how to fail’ section!

Cheers friends!


references:

3/4″ Pipe at Lowes
1″ Pipe at Lowe’s
Construction Kits from White Wolf